SketchUp keyboard shortcuts for Windows and Mac

The default tool keys of SketchUp for Desktop are mostly single letters, the same on Windows and Mac: L for Line, P for Push/Pull, M for Move. They fill the first three sections; the later ones add a few command shortcuts and the modifier keys and mouse actions each tool responds to once it is active. For those modifiers a Mac nearly always uses Option where Windows uses Ctrl and Cmd where Windows uses Alt; Shift is shared.

85 shortcuts in 8 sections. Checked row by row against SketchUp Help on . Edited by Jay.

Drawing Tools 7

ActionWindowsMac
LineDraws edges. The workhorse tool; every face in SketchUp starts as a closed loop of lines.LL
RectangleDraws a rectangular face. SketchUp's own table prints this row as "Rectangle/".RR
CircleDraws a circle. Type a number before or after clicking to set the segment count.CC
2 Point ArcDraws an arc from two endpoints plus a bulge distance.AA
Push/PullExtrudes a face into 3D. The move that turns a flat rectangle into a wall.PP
OffsetCopies a face's edges inward or outward at a fixed distance.FF
Make ComponentWraps the selection into a reusable component.GG

Selection & Editing 8

ActionWindowsMac
SelectReturns to the Select tool. The default state between every other operation.SpaceSpace
Lasso SelectFree-draws a selection boundary instead of a rectangular one.Shift+SpaceShift+Space
MoveMoves the selection. Tap Ctrl (Option on a Mac) mid-move to copy instead.MM
RotateRotates the selection around a protractor you place yourself.QQ
ScaleScales the selection using corner and face grips.SS
EraserDeletes edges. Drag across several without releasing to erase in bulk.EE
Paint BucketApplies the active material to a face, group, or component.BB
Tape MeasureMeasures a distance and, on a face or edge, drops a guide line.TT

Edit Commands 5

Trimble names Alt+Backspace as the default Undo shortcut and adds that Ctrl+Z on Windows and Command+Z on a Mac also work.

ActionWindowsMac
Select AllSelects every entity in the model.Ctrl+ACmd+A
Deselect AllClears the selection so nothing is highlighted.Ctrl+TShift+Cmd+A
UndoReverses the most recent action; the Edit menu names the action it will take back.Ctrl+ZorAlt+BackspaceCmd+Z
Cancel OperationAbandons the step in progress so you can start the tool again.EscEsc
Apply Typed MeasurementConfirms a value typed into the Measurements box, such as a line length.EnterReturn

Select Tool Modifiers 5

ActionWindowsMac
Add to SelectionHold while clicking or dragging with Select to add entities to the selection.CtrlOption
Toggle Selection StatusHold while clicking to select an unselected entity or deselect a selected one.ShiftShift
Subtract from SelectionHold while clicking or dragging to take entities out of the selection.Ctrl+ShiftOption+Shift
Select Face and Its EdgesDouble-clicking a face also selects the edges around it.Double-clickDouble-click
Select All Connected GeometryTriple-clicking any entity selects everything joined to it.Triple-clickTriple-click

Drawing Modifiers 19

On a Mac the segment keys depend on the tool: arcs take Option with + or -, freehand curves take Command with + or -.

ActionWindowsMac
Lock Current InferenceHold while drawing to keep the direction or plane SketchUp is inferring right now.ShiftShift
Lock to Blue AxisConstrains the drawing direction or plane to the blue axis.UpUp
Lock to Green AxisConstrains the drawing direction or plane to the green axis.LeftLeft
Lock to Red AxisConstrains the drawing direction or plane to the red axis.RightRight
Lock Parallel or PerpendicularToggles a lock parallel or perpendicular to the inferred edge or plane, shown in magenta.DownDown
Toggle Linear Inferencing (Line)After starting a line, cycles between all inferences, none, and parallel/perpendicular only.AltCmd
Free Rotate or Protractor CenterKeeps the locked plane while letting the Rotate or Protractor center move elsewhere.Shift+AltShift+Cmd
Lock Protractor Plane (Rotated Rectangle)While placing the first edge of a rotated rectangle, fixes the plane of the protractor.AltCmd
Add Arc SegmentsRaises the segment count of the arc you just drew.Ctrl++Option++
Remove Arc SegmentsLowers the segment count of the arc you just drew.Ctrl+-Option+-
Lock Tangent Inference (Arc)Holds the tangent picked up from an edge while you place a 2-point or 3-point arc.AltCmd
Add Freehand SegmentsAdds segments back to the freehand curve you just drew, up to the original count.Ctrl++Cmd++
Remove Freehand SegmentsReduces the number of segments in the freehand curve you just drew.Ctrl+-Cmd+-
Push/Pull a CopyTap before pulling to leave the original face in place and extrude a new one.CtrlOption
Repeat Last Push/PullDouble-clicking another face applies the previous push/pull distance to it.Double-clickDouble-click
Allow Overlapping OffsetLets an offset keep the overlaps that SketchUp normally trims away.AltCmd
Repeat Last OffsetDouble-clicking another face right after an offset reuses the same distance.Double-clickDouble-click
Follow Me Around a FaceWith Follow Me, uses the perimeter of the clicked face as the extrusion path.AltCmd
Switch Axis (Axes Tool)After the origin is placed, switches the axis you set first from red, the default, to green or blue.AltCmd

Editing Modifiers 24

The modifier pattern is the same across tools: where Windows uses Ctrl the Mac uses Option, and where Windows uses Alt the Mac uses Command. Shift is shared.

ActionWindowsMac
Copy While MovingToggles copy mode so the Move tool leaves the original and places duplicates.CtrlOption
Toggle AutofoldLets a move add fold lines when SketchUp would otherwise keep faces planar.AltCmd
Cycle Move GripsWith a group or component selected, steps through its corner, midpoint, side, and center grips.AltCmd
Rotate a CopyRotates a duplicate and leaves the original where it was.CtrlOption
Cycle Rotate GripsSteps through the object center, edge center, and edge corner grips before you rotate.AltCmd
Scale About CenterScales from the middle of the selection instead of from the opposite grip.CtrlOption
Toggle Uniform ScalingKeeps or releases the proportions of the selection while you drag a scale grip.ShiftShift
Flip a CopySwitches the Flip tool to copy mode, creating a mirrored duplicate.CtrlOption
Flip on Parent AxesSwitches the Flip planes between the object’s own axes and its parent’s axes.AltCmd
Soften Edges (Eraser)Makes the Eraser smooth the edges you drag over instead of deleting them.CtrlOption
Hide Edges (Eraser)Makes the Eraser hide the edges you click instead of deleting them.ShiftShift
Unsoften Edges (Eraser)Reverses softening and smoothing on the edges you click.AltCmd
Paint Adjacent Matching FacesFills every connected face that carries the same material as the one you click.CtrlOption
Replace Material EverywhereRepaints every face in the model that shares the clicked face’s material.ShiftShift
Replace Material on ObjectRepaints only the matching faces that belong to the same object.Ctrl+ShiftOption+Shift
Sample MaterialHold to pick up the material under the cursor.AltCmd
Toggle Guides (Tape Measure)Switches the Tape Measure between creating guides and measuring only.CtrlOption
Toggle Guides (Protractor)Switches the Protractor between leaving an angled guide and measuring only.CtrlOption
Free Protractor from PlaneThe protractor keeps the orientation of the plane it was on, but can now be moved to reference other geometry.AltCmd
Sample TagWith the Tag tool, makes the clicked entity’s tag the selected tag.AltCmd
Replace Tag EverywhereWith the Tag tool, retags every entity that shares the clicked entity’s tag.ShiftShift
Tag All InstancesWith the Tag tool, tags every instance of the clicked component.CtrlOption
Modify or Erase SnapsSwitches the Snaps tool to its mode for modifying or erasing existing snaps.CtrlOption
Reverse Snap OrientationWhile hovering with the Snaps tool, flips the direction the snap faces.AltCmd

Camera & Mouse 10

Trimble’s Walk table prints Alt for walking through walls in both its Windows and Mac columns, although Option is already its Mac key for running, so only the Windows key is listed.

ActionWindowsMac
Suspend Orbit GravityHold while orbiting to roll the camera instead of keeping vertical edges upright.CtrlOption
Pan from the Orbit ToolHold with Orbit active to pan until you let go.ShiftShift
Change Field of ViewWith the Zoom tool, hold Shift and drag to widen or narrow the field of view.Shift+DragShift+Drag
Zoom with the WheelZooms toward or away from the cursor without leaving the active tool.ScrollScroll
Orbit with the Wheel ButtonHold the scroll wheel and move the mouse to orbit from inside any tool.Middle-click+DragMiddle-click+Drag
Pan with the Wheel ButtonHold Shift and the scroll wheel, then move the mouse to pan.Shift+Middle-click+DragShift+Middle-click+Drag
Re-center View (Wheel Button)Double-clicking the wheel button centers the view on the point you clicked.Double-clickDouble-click
Walk Up or DownWith the Walk tool, moves the camera vertically instead of forward and back.ShiftShift
Run (Walk Tool)A speed modifier for the Walk tool; dragging farther from the crosshair is the other way to go faster.CtrlOption
Walk Through WallsTurns off collision detection so the Walk tool passes through geometry.Alt—

Notes

SketchUp’s shortcut list is short on purpose

Most CAD packages answer “what are the shortcuts?” with several hundred rows. SketchUp answers with twenty-two, and that is Trimble’s whole default table — the first three tables above are not a selection from a larger list, they are the list. The tables after them are a different kind of key: the modifiers and mouse actions those tools respond to once they are active. The reason is that SketchUp leans on inference rather than on commands: you do not press a key to snap to a midpoint, you hover until the tooltip says Midpoint. So the default keys only need to cover tool selection, and one letter per tool is enough. L line, R rectangle, C circle, A arc, P push/pull, M move, Q rotate, S scale. Learn those eight and you have most of a modelling session.

The three keys people miss

Newcomers usually discover L and P on day one and then stop. Three more are worth deliberate practice. F is Offset, which copies a face’s outline inward at a fixed distance — the fastest way to turn a slab into a wall with thickness. G makes a component, and doing it early is the difference between a model you can edit and one where every window is a separate pile of edges. Shift + Z is Zoom Extents, the reset button for when you scroll and the model vanishes. Two more are worth knowing about even if you rarely press them: K shows back edges as dashed lines, which is how you check alignment through a solid, and I is the Photo Matching image control, which Trimble labels “Image Igloo” in its own table — an odd name we have kept because changing it would make the row impossible to match against the official page.

Questions

Is this really all of SketchUp’s shortcuts?

The twenty-two default keys are. Trimble’s Default Keyboard Shortcuts page lists twenty-two rows and the first three tables here mirror all twenty-two. The remaining tables add what Trimble documents in its help articles and Quick Reference Card: tool modifier keys, mouse navigation, and a few command shortcuts such as Ctrl + A (Cmd + A on a Mac). A command without a default can be given a key under Window › Preferences › Shortcuts on Windows or SketchUp › Settings › Shortcuts on macOS.

Why is the Rectangle row labelled “Rectangle/” in some lists?

Because that is the literal text in Trimble’s table, trailing slash and all. We print it as Rectangle here and mention the original spelling so you can match this page against the source line by line.

Do these keys work in SketchUp for Web?

Trimble states that the web version’s defaults are nearly identical to desktop. The safest check is to hover a tool in the web toolbar — the assigned key appears in the tooltip.

Why is Orbit on O when everyone uses the middle mouse button?

Both work. Holding the scroll wheel is the mouse route; O, H and Z are the keyboard equivalents for Orbit, Pan and Zoom, which matter on a trackpad or a pen tablet where there is no middle button to hold.

What is the fastest way to reset the view when I get lost?

Shift + Z. It frames the entire model regardless of how far you have zoomed or panned, and it is the single most useful navigation key on the list.

Can I change these defaults?

Yes, every default shortcut can be reassigned, and on Windows you can export the resulting set and import it on another machine. That is worth doing if you share a workstation, because a custom map that only lives in one profile will bite you.

Sources and checks

15 more source pages

Every row on this page was matched to a line in the documentation above on . A binding that could not be found there is not listed.

Found a wrong or missing key? Tell us and it gets checked against the source. How we verify describes the process and its limits.