Autodesk Inventor keyboard shortcuts for Windows

In Autodesk Inventor the same alias letter does different jobs in different environments: C draws a circle in a sketch, adds a constraint in an assembly and creates a simulation in Frame Analysis. The alias sections follow that split, after the ordinary shortcut keys. Longer aliases such as REC make up most of the list and stay inactive until Use Default Multi-Character Command Aliases is ticked on the Keyboard tab of the Customize dialog.

362 shortcuts in 26 sections. Checked row by row against Autodesk on . Edited by Jay.

Keyboard Shortcuts: General 20

Ctrl + A is Select All in the Shortcut Key Guide, but the Inventor help describes it as Select Other when a component or subassembly is being selected in a model view.

ActionWindows
Select AllSelects everything on the screen; the Inventor help describes the same keys as Select Other in model views.Ctrl+A
CopyCopies the selected items to the clipboard.Ctrl+C
FindBrings up Find Part Sketches in a part file and Find Assembly Components in an assembly file.Ctrl+F
NewStarts a new document through the New File dialog box.Ctrl+N
OpenBrings up the Open dialog box for an existing file.Ctrl+O
PrintBrings up the Print dialog box for the active document.Ctrl+P
SaveSaves the active document; the Shortcut Key Guide describes it as showing the Save As dialog box.Ctrl+S
PastePastes what was cut or copied into the active document.Ctrl+V
CutCuts the selected items so they can be pasted elsewhere.Ctrl+X
RedoBrings back the command that was just undone.Ctrl+Y
UndoTakes back the effect of the last command.Ctrl+Z
DeleteDeletes whatever is selected in the model or drawing.Delete
SelectBrings up the Select command menu.Shift+Right-click
CancelEnds the tool or command that is active.Esc
HelpBrings up Help for the command or dialog box in use.F1
Rename Browser NodeWith a node selected in the model browser, switches that node to rename mode.F2
Switch Browser Pane BackwardSwitches between the Inventor browser and the Vault add-in browser, stepping backward.Alt+A
Switch Browser Pane ForwardSwitches between the Inventor browser and the Vault add-in browser, stepping forward.Alt+S
MacrosBrings up the Macros dialog box.Alt+F8
Visual Basic EditorStarts the Microsoft Visual Basic Editor.Alt+F11

Keyboard Shortcuts: View 24

ActionWindows
PanPans across the graphics window for as long as the key is held down.F2
ZoomZooms in or out in real time for as long as the key is held down.F3
RotateTurns the model in the graphics window.F4
Previous ViewGoes back to the view that was displayed before.F5
Next ViewMoves forward again to the next view.Shift+F5
Home ViewSwings the model back to its isometric home orientation.F6
Sketch VisibilityTurns on the display of sketches.F10
Zoom AllFits every object into the graphics window.Home
Zoom SelectedEnlarges the view until the chosen edge, feature or other element fills the graphics window.End
Look AtTurns the view to look straight at a selected entity.Page Up
Zoom WindowZooms to a window that you drag over part of the view.Shift+F3
RotateOrbits the model while Shift and the middle mouse button are held down.Shift+Middle-click
Switch 3D Rotate ModeWorks only while 3D Rotate is running: alternates free rotation with the fixed isometric and single-plane views.Space
Toggle ScreenSwitches the screen display mode; the guide says only that it toggles the screen.Ctrl+0
Steering WheelsDisplays the wheel that groups navigation tools such as zoom, pan and orbit at the cursor.Ctrl+W
Degrees of FreedomIn an assembly, shows symbols for the translations and rotations that components can still make.Ctrl+Shift+E
iMate GlyphActivates the tool for iMate glyphs, the symbols that mark iMates on a component.Ctrl+Shift+Q
Toggle Object VisibilityTurns the visibility of selected solids and work features (planes, axes, points) on or off.Alt+V
User Work Points VisibilityShows the work points you have created.Alt+.
User Work Plane VisibilityShows the work planes you have created.Alt+]
User Work Axes VisibilityShows the work axes you have created.Alt+/
Origin Points VisibilityMakes the default origin points visible; with Alt instead of Ctrl the key covers user work points.Ctrl+.
Origin Plane VisibilityApplies to the default origin planes; the same key with Alt covers the work planes you created.Ctrl+]
Origin Axes VisibilityMakes the default origin axes visible, where the Alt version of the key shows user work axes.Ctrl+/

Keyboard Shortcuts: Sketch 6

ActionWindows
EqualApplies the Equal constraint, giving curves the same radius or length.=
Horizontal ConstraintStarts the Horizontal Constraint command in a sketch.-
Slice GraphicsTemporarily cuts away the part of the model that hides the sketch plane.F7
Show All ConstraintsDisplays every constraint in the sketch.F8
Hide All ConstraintsHides every constraint in the sketch.F9
Remove Last Line SegmentWhile the Line command is active, deletes the segment that was sketched last.Backspace

Keyboard Shortcuts: 3D Sketch 5

ActionWindows
Toggle Dimension HUDSwitches the dimension heads-up display on or off in a 3D sketch.Ctrl+D
Toggle Ortho ModeTurns orthogonal drawing of 3D sketch lines and splines on or off.Ctrl+R
Infer ConstraintsTurns the automatic applying of constraints on or off in a 3D sketch.Ctrl+I
Snap ObjectTurns object snap on or off in a 3D sketch.Ctrl+Shift+P
Switch Sketch PlaneChanges the sketch plane while 3D sketch lines and splines are drawn.Shift+Space

Keyboard Shortcuts: Part & Features 6

ActionWindows
ChamferActivates the feature tool that bevels the edges you select.Ctrl+Shift+K
LoftActivates the tool that blends two or more sketch profiles into one feature.Ctrl+Shift+L
MirrorActivates the tool that copies features to the other side of a plane.Ctrl+Shift+M
Circular PatternBrings up the Circular Pattern dialog box.Ctrl+Shift+O
Rectangular PatternBrings up the Rectangular Pattern dialog box.Ctrl+Shift+R
SweepActivates the tool that moves a sketch profile along a path to form a feature.Ctrl+Shift+S

Keyboard Shortcuts: Work Features 4

ActionWindows
Grounded Work PointPlaces a work point that is grounded, then starts the 3D Move/Rotate tool.;
Work AxisCreates a construction axis from existing geometry, such as an edge or two points./
Work PlaneAdds a construction plane, for example as the plane for a new sketch.]
Work PointPlaces a construction point that later features and other work geometry can reference..

Keyboard Shortcuts: Assembly 4

ActionWindows
Mate ConstraintIn an assembly the drag applies the constraint; in a sketch it moves the shape points of a spline instead.Alt+Drag
Replace ComponentSwaps one component of the assembly for another.Ctrl+H
PromoteTakes a part out of its subassembly and makes it a separate part of the parent assembly.Shift+Tab
DemoteRuns Demote, the counterpart of Promote.Tab

Keyboard Shortcuts: Drawing Manager 2

ActionWindows
New SheetAdds a new sheet to the drawing.Ctrl+Shift+N
Leader TextAdds a note with a leader line to the drawing.Ctrl+Shift+T

Command Aliases: Sketch 26

Aliases of two or more characters belong to Inventor's default multi-character alias set, which is not enabled by default. Switch it on with Tools tab, Options panel, Customize, Keyboard tab: Use Default Multi-Character Command Aliases.

Autodesk's two references disagree on a few aliases. The Inventor help lists TR for Trim, M for Move Component, RO for Rotate Component, ODS for Ordinate Dimension Set and FC for Feature Control Frame; the Shortcut Key Guide lists X, V, G, O and F. Both are shown here, and the Keyboard tab of the Customize dialog shows what your installation uses.

ActionWindows
LineStarts Line, which draws lines and arcs.L
ArcStarts Arc in a sketch; in other environments the same letter starts Baseline Set or Animate.A
Three Point ArcDraws an arc through three points, with dynamic input.A3
Center Point CircleDraws a circle from its center point, with dynamic input.CE
Center Point CircleDraws a circle in a sketch according to the Inventor help's shortcut reference; the Shortcut Key Guide lists CE.C
Tangent CircleDraws a circle that is tangent to three lines.TC
EllipseDraws an ellipse; you set its center point and then the major and minor axes.EL
Two Point RectangleDraws a rectangle from two points, with dynamic input.REC
Three Point RectangleDraws a rectangle from three points, with dynamic input.REC3
PolygonDraws a polygon with equal sides in a sketch; its dialog box sets the number of sides.POL
SplineWorks in a sketch; in the Cable and Harness environment the same alias creates a splice instead.SP
Point, Center PointPlaces sketch points and center points.PO
FilletStarts Fillet, which rounds one or more edges.FI
ChamferStarts Chamfer from within a sketch.CH
TrimStarts the Trim command; the Inventor help's shortcut reference lists TR instead.X
TrimStarts Trim according to the Inventor help's shortcut reference; the Shortcut Key Guide lists X.TR
ExtendStarts Extend; the guide's description is of enlarging surfaces in one direction or several.EX
OffsetCopies the selected sketch geometry and places the copy at an offset distance.O
MoveMoves the selected sketch geometry from one point to another, or moves a copy of it.MO
MirrorCreates a mirror image of sketch geometry across a selected plane.MI
Rectangular PatternRepeats sketch geometry in a rectangular pattern.RP
Circular PatternRepeats sketch geometry in a circular pattern.CP
VerticalActivates the sketch constraint tool that sets lines upright, parallel to the Y axis.I
Auto DimensionBrings up the Auto Dimension dialog box.AD
Fill/Hatch Sketch RegionIn a drawing sketch, fills a closed boundary with a hatch pattern or a color.H
BendCreates a bend; the guide lists this alias under both Sketch and Sheet Metal.BE

Command Aliases: Sketch Features 6

ActionWindows
ExtrudeExtrudes a profile into a feature.E
RevolveCreates a revolved feature from a sketch.R
HoleAdds a hole to a feature.H
LoftBlends several profiles into a smooth lofted feature or body.LO
SweepStarts Sweep to build a sweep feature.SW
Bend PartBends a portion of the part about a sketched line that serves as the bend line.BP

Command Aliases: Placed Features 12

ActionWindows
FilletAdds a fillet; it works in part and assembly files.F
FilletA second alias in the guide that starts the Fillet tool.W
Face DraftCreates a face draft, or taper, on a part according to the Inventor help's shortcut reference.D
ShellHollows out a part, leaving walls of the thickness you specify.SH
ThreadAdds threads to holes, or to shafts, studs and bolts.TH
Direct EditStarts Direct Edit for fast changes to solids that already exist.DE
2D SketchStarts a sketch on a face or plane; the alias works in part, assembly and sketch environments.S
New 3D SketchStarts a 3D sketch in a part, for geometry that does not lie on a single plane.S3
Create iMateOpens Create iMate, the dialog box where iMates are defined.Q
Groove WeldAdds a groove weld to a weldment assembly: a solid bead that connects one set of faces to another.GW
End FillAdds the hatched or filled end-fill region that shows where a weld bead stops; works on 3D beads and drawing views.EF
Welding SymbolAdds a welding symbol that annotates several weld beads as one group.WS

Command Aliases: Assembly 12

ActionWindows
Place ComponentPuts a component into the current assembly.P
Create ComponentOpens the Create In-Place Component dialog box, where a new component is defined.N
ConstraintsStarts the command for adding an assembly constraint.C
Move ComponentStarts the Move Component command; the Inventor help's shortcut reference lists M instead.V
Move ComponentStarts Move Component according to the Inventor help's shortcut reference; the Shortcut Key Guide lists V.M
Rotate ComponentStarts the Rotate tool for a component; the Inventor help's shortcut reference lists RO instead.G
Rotate ComponentStarts the Rotate Component command; the help files this alias under Assembly, the Shortcut Key Guide under Sketch.RO
Copy ComponentsCreates copies of the selected assembly components, each either saved as a new file or reused as another instance.CO
Mirror ComponentsBuilds a mirrored copy of a component.MI
Pattern ComponentArranges one or more selected components in a pattern.PC
Replace AllSwaps out a component everywhere it occurs in the current assembly.RA
Analyze InterferenceChecks the components of an assembly for places where they overlap.IA

Command Aliases: Drawing Manager 10

ActionWindows
Base ViewPlaces a base view on the drawing; the help also lists this alias for the Cable and Harness nailboard.BV
Projected ViewCreates an orthographic or isometric view from an existing parent view; the cursor direction decides which.PV
Auxiliary ViewProjects a new auxiliary view off an edge or a line in the parent view.AV
Section ViewNeeds a parent view and a section line sketched across it, which defines where the model is cut.SV
Detail ViewStarts Detail View, whose detail profile can be circular or rectangular.DV
BreakShortens a view by breaking it.BRV
Break OutReveals hidden parts or features in an existing drawing view by cutting away a region of material you define.BO
CropSets the boundary type and the visibility of cut lines for cropping a view.CR
Retrieve DimensionsBrings model dimensions into the drawing.RD
Balloon / BOMRuns the Balloon tool in one work environment and opens the BOM Properties dialog box in another.B

Command Aliases: Dimension 10

ActionWindows
General DimensionPlaces a dimension in a sketch or on a drawing.D
Baseline DimensionMeasures the selected geometry from one common baseline and places a separate dimension for each item.BD
Baseline Dimension SetStarts the Baseline Dimension Set command, an alias listed in the Inventor help's shortcut reference.BDA
Ordinate DimensionGives the distance of a point or edge from an origin that is marked in the drawing view.OD
Ordinate Dimension SetStarts the Ordinate Dimension Set command; the Inventor help's shortcut reference lists ODS instead.O
Ordinate Dimension SetStarts Ordinate Dimension Set according to the Inventor help's shortcut reference; the Shortcut Key Guide lists O.ODS
Hole/Thread NotesLabels a hole or thread with a note on a leader line.HN
Chamfer NoteLabels a chamfer in a drawing view with a note.CN
Bend NotesMakes a new bend note or edits an existing one.BN
Punch NotesLabels a sheet metal punch in a drawing view with a note.PN

Command Aliases: Annotation 20

ActionWindows
TextIn a drawing file, starts the tool for placing text.T
Leader TextAttaches a note with a leader line to the drawing.LE
Auto BalloonPlaces item balloons that identify the components in drawing views.BA
Parts ListBuilds the table from the bill of materials of the model in a selected view or file.PL
TablePlaces a general table on the drawing sheet, with the columns and rows set in its dialog box.TB
Hole Table - ViewTabulates every hole found in the chosen drawing view, unlike the Features and Selection variants.HTV
Hole Table - FeaturesSelects a feature set for the hole table: all punch center instances of one feature.HTF
Hole Table - SelectionSelects recovered punch centers one at a time for the hole table.HTS
CenterlineDraws a centerline through points picked in a drawing view, for example the centers of two holes.CL
Centerline BisectorPlaces a centerline that bisects the two edges you select in a drawing view.CB
Center MarkMarks the center of a circle or arc that you pick in a drawing view.CM
Feature Control FrameAdds a feature control frame to a drawing file; the Inventor help's shortcut reference lists FC instead.F
Feature Control FrameStarts Feature Control Frame according to the Inventor help's shortcut reference; the Shortcut Key Guide lists F.FC
Feature Identifier SymbolPlaces its symbol on a drawing; elsewhere the same alias starts Fillet, which the guide lists under Sketch.FI
Datum Identifier SymbolLabels a datum on the drawing with the letter that feature control frames refer to.DI
Surface Texture SymbolAttaches a surface finish symbol to geometry in a drawing view; the roughness values go in its dialog box.ST
CaterpillarDraws the caterpillar pattern that marks a weld in a drawing view.CAT
SymbolsPlaces sketched symbols on a drawing sheet.SY
Revision TagPlaces revision tags on a drawing.RT
Revision TableLists the revisions of the whole drawing or of the active sheet, depending on the table scope chosen.RTB

Command Aliases: Sheet Metal 9

ActionWindows
FaceBuilds a sheet metal face by giving a sketch profile the thickness of the sheet.FA
Contour FlangeBuilds the flange from an open sketch profile, turning the sharp corners of the sketch into bends.CF
FoldSets up a fold at a sketched line that runs to the edges of a sheet metal face.FO
HemGives sheet metal edges a folded hem.HEM
Corner SeamDefines the corner seams that are added to sheet metal faces.CS
Corner RoundRounds off sheet metal corners, one or several at a time, by adding fillets.CR
Corner ChamferStarts the command that bevels sheet metal corners, where Corner Round fillets them.CC
PunchToolStamps a three-dimensional punch shape into the face of a sheet metal part.PT
Sheet Metal DefaultsOverrides, for the active part, the options and parameters that its Sheet Metal Rule would otherwise set.ST

Command Aliases: Presentation 2

ActionWindows
Create ViewWorks in a presentation file, where it adds a new view of the model.CV
Tweak ComponentsStarts Tweak Components in a presentation file.T

Command Aliases: Tools & View 8

ActionWindows
Measure DistanceBrings up the Measure Distance window.M
Application OptionsBrings up the Application Options settings.OP
Edit StylesBrings up the Style and Standard Editor.SE
Edit LayersDefines layers by name and attributes, which control the shared display properties of drawing objects.LA
Zoom WindowZooms in on an area that you specify.Z
PanStarts Pan as a typed command, where F2 pans only while the key is held down.PAN
Free OrbitRotates the model about the screen center or about model-space axes.ORBIT
ViewCubeShows or hides the cube in the graphics window that is used to pick standard views.VC

Command Aliases: Part 2

ActionWindows
Toggle SmoothIn freeform editing, switches the body display between smooth and box modes.1
Edit FormChanges an existing form by adding, removing or modifying controls.E

Command Aliases: Cable & Harness 31

The same alias can start different commands depending on the design environment and the object you are working on, which is why P, CC, CH, PR, PS and SK appear more than once.

ActionWindows
Create HarnessAdds a harness subassembly with a given name and location to an assembly and shows the Cable and Harness tab.HA
Automatic RouteLets Inventor route the selected wires into segments, choosing the shortest way through the network.AR
RouteRoutes cables and wires by hand.RT
UnrouteTakes the selected wires out of the selected segments.U
Check Bend RadiusLooks for bends tighter than the minimum bend radius on segments, wires and cables of the active harness.BR
Create CableBuilds a cable whose wires are connected or terminated at selected pins in the harness assembly.CC
Create WireConnects selected pins of a harness assembly with a new wire.CW
Create Ribbon CableRuns a ribbon cable from a start connector to an end connector.CR
Create FoldAdds a fold; the help places this alias in the harness environment.CF
Create SegmentAdds a harness segment, the path that wires and cables are routed through.CS
Create SplicePlaces a splice in the harness for joining wires; in a sketch the same alias starts Spline.SP
Reconnect Wire PinsChanges the pins that an existing wire is connected to.RW
Assign Virtual PartsAttaches parts without modeled geometry, such as seals, plugs and terminals, to harness objects.V
Cable & Harness LibraryAdds, edits, copies or deletes the library definitions of harness objects such as wires, cables and virtual parts.L
Import Harness DataReads a wire list from an external file and adds its wires and cables to the harness.IH
Export Harness DataCounterpart of Import Harness Data: writes the harness data out to an external file.EH
Review Harness DataRH
ReportRuns reports on the harness assembly that is currently active.RG
NailboardPicks the harness assembly and setup from which a nailboard view is created or edited.NB
Connector AuthoringAdds the Cable and Harness data that completes a connector definition; used in a part.CA
Harness PropertiesShows the custom properties of harness components.HP
Place PinPuts a pin on a part.P
Place Pin GroupPuts several pins on a part at once with set naming, configuration and orientation.PG
Broken Sketch EntityIn a nailboard, sets the start and end of the length to cut out of a cable, wire or segment.BS
Place Connector ViewsPuts connector views on a nailboard.CV
EditOpens the nailboard sketch for editing.E
Fan InCollapses wire stubs onto one another to reduce clutter in nailboard documentation.F
Fan OutSpreads wire stubs evenly around a segment endpoint at a set angle and sorting direction.FO
Harness DimensionDimensions the distance between two points with a driven, aligned dimension.HD
PivotFixes segment points so the selected segment can be dragged about that fixed point.P
Property DisplayShows the properties of whichever objects are selected.PD

Command Aliases: Tube & Pipe 16

ActionWindows
Tube & Pipe AuthoringAuthors a part, either an iPart or a normal one, so it can be published to the Content Center Library.AT
Create Pipe RunAdds a pipe run to the assembly; in another context the same alias runs Populate Route.PR
Populate RoutePopulates the route; the same alias as Create Pipe Run in another context.PR
New RouteAdds a rigid piping or bent tubing route to a pipe run.NR
Derived RouteMakes a derived route or edits one; the guide prints the name as Derived Motion.DR
Edit Base SketchOpens the base 3D sketch for editing.ES
Include GeometryBrings reference geometry into the route sketch.IG
Insert NodePuts a route node into a segment.IN
Move NodeRepositions a node by dragging it.MN
Move SegmentRepositions a segment by dragging it.MS
Hose LengthAdjusts hose length by changing the end tangency weights.HL
Place FittingTakes a fitting from the project workspace and places it in the active run.PF
Connect FittingsWorks in the tube and pipe environment on fittings that are already placed.CF
Grounded Work PointStarts Grounded Work Point from the tube and pipe environment.WT
Tube and Pipe StylesManages tube and pipe styles: copy or edit existing definitions and remove the ones no longer needed.ST
ISOGEN OutputWrites an ISOGEN file; you choose its name and file type.IO

Command Aliases: Dynamic Simulation 14

ActionWindows
Insert JointAdds a joint to the mechanism.J
Convert Assembly ConstraintsTurns assembly constraints into the standard joints that Dynamic Simulation works with.CC
ForceLoads the selected objects with a force.F
TorqueLoads the selected objects with a torque.TO
Unknown ForceWorks out the force, torque or jack needed to hold a mechanism in static equilibrium at a given position.UF
Dynamic MotionStarts Dynamic Motion for moving parts dynamically.DM
Mechanism Status and RedundanciesReports the status of the model and guides you through repairing redundant constraints.MS
Output GrapherShows graphs and numeric values of all input and output variables during and after a simulation.OG
TraceProduces absolute or relative kinematic values, such as trajectory, velocity and acceleration, for points on a component.TR
Reference FrameUses the input you provide to set up a reference frame.RF
Dynamic Simulation SettingsSets session-wide options for Dynamic Simulation.SET
Publish MoviePublishes the simulation as an AVI animation.AVI
Publish to StudioPublishes the simulation as a studio animation.CSA
Export to FEAStarts the Export to FEA command.FEA

Command Aliases: Frame Analysis 27

ActionWindows
Create SimulationSets up a new frame analysis simulation.C
SimulateRuns the frame analysis simulation that Create Simulation set up.S
ReportProduces a report of the analysis.R
ExportExports the model to Robot Structural Analysis.EX
Beam PropertiesLists a frame member's physical and engineering properties, and the data can be customized.P
Beam MaterialsLets you change the material of a beam.MA
Continuous LoadPuts a uniform load, distributed along its length, on the beam you select.CL
MomentPuts a general moment on the selected beam.MO
Axial MomentPuts an axial moment on the model.AM
Bending MomentPuts a bending moment on the selected beam.BM
Fixed ConstraintFixes selected faces, edges or vertices with a fixed constraint.X
Pinned ConstraintPins a beam or node so that it can rotate freely but cannot be displaced.PN
Floating Pinned ConstraintPuts a floating pinned constraint on the model.FL
ReleaseReleases specified degrees of freedom on a selected beam of the structure.RE
Rigid LinkTies selected nodes of a frame structure together with a rigid link.RL
Animate ResultsPlays the selected simulation results as an animation.A
ProbeShows the simulation result at one specific point of the model.B
Beam DetailShows detailed results, as diagrams and tables, for the selected beams.BD
DiagramPuts a custom user diagram on the model.D
Color BarOpens the color bar for editing.CB
No ShadingSwitches the Shaded Results display off.N
Boundary ConditionsShows or hides all boundary conditions.BC
Beam LabelsShows or hides the beam labels.LB
Node LabelsShows or hides the node labels.LN
Probe LabelsShows or hides the probe labels.LP
Local SystemsShows or hides the local systems of the beams.LS
Load ValuesShows or hides the load values.LV

Command Aliases: Stress Analysis 30

ActionWindows
Create SimulationSets up a new stress analysis simulation.N
Stress Analysis SettingsBrings up the Stress Analysis Settings dialog box.SET
Parametric TableOpens the parametric table, where design constraints and parameter ranges are specified.T
Assign MaterialsBrings up the dialog box for assigning materials to a component.MAT
Fixed ConstraintFixes selected faces, edges or vertices with a fixed constraint.CF
Pin ConstraintSets the origin and offset of a pin constraint.CP
Frictionless ConstraintGives the faces you select a frictionless constraint.CS
Force LoadLoads selected faces, edges or vertices with a force whose magnitude you set.FO
Pressure LoadApplies a pressure of the magnitude you enter to the selected faces in a stress analysis.PR
Bearing LoadLoads a cylindrical surface, whole or partial, with a bearing load.BE
Moment LoadApplies a moment: a load of the magnitude you enter that acts about the axis, at right angles to the face.MO
Gravity LoadAdds a gravity load to the model.GR
Remote Force LoadLoads the selected face with a force whose magnitude you set.RF
Body LoadGives the model a linear acceleration, an angular acceleration or an angular velocity.BO
Automatic ContactsStarts Automatic Contacts, which the guide describes as comparing automatic contacts.AC
Manual ContactPuts manual contact conditions on selected geometry elements.MC
Mesh SettingsSets the sizing and coarseness of the mesh.MS
Local Mesh ControlPuts a local mesh control on the model.ML
Mesh ViewShows the element mesh together with the result contours, and over the undeformed model.MV
ProbeStarts Probe, for placing probes that show the stress value at points of interest.P
Probe LabelsShows or hides the probe labels.PL
Color BarBrings up the Color Bar settings dialog box for adjusting how the color bar is displayed.CC
Convergence PlotShows the convergence plot in a dialog box.CP
Contour ShadingShows color changes with strict banding between the colors.CT
Smooth ShadingShows color changes with a blended transition.SM
No ShadingSwitches the Shaded Results display off.NP
Maximum ResultSwitches the display of the maximum-result point on or off.MAX
Minimum ResultSwitches the display of the model's minimum-result point on or off.MIN
Result Displacement ScaleChanges the scale used to display displacement.SC
Same ScaleKeeps one scale while you look at different results.SS

Command Aliases: Mold Design (Parts, Core & Cavity) 29

ActionWindows
Create Mold DesignFirst step of the mold workflow: creates the mold design into which the plastic parts are then placed.NM
Plastic PartAdds a part, or several, to the Mold Design project.PP
Edit Moldable PartEM
PatternCopies a plastic part into a pattern of occurrences, which can be rectangular, circular or variable.PT
Adjust OrientationBrings up the Adjust Orientation dialog box.AO
Adjust PositionBrings up the Adjust Position dialog box.AP
Select MaterialPicks the plastic material for the part in a mold design.SM
Part ShrinkageGives an estimated shrinkage percentage for a single part.SK
Mold ShrinkageGives an estimated shrinkage percentage derived from the dimensions of the mold.SK
Core/CavitySwitches to the environment for designing and analyzing the core and cavity.CD
Finish Core/CavityRuns Finish Core/Cavity; the guide describes it as activating the core and cavity environment.F
Define Workpiece SettingCreates the workpiece, rectangular or cylindrical, that has to exist before a core and cavity can be generated.DW
Workpiece PocketCreates the pockets for a workpiece of rectangular shape.WP
Create Patching SurfaceCloses holes in the plastic part with surfaces so that the core and cavity can be separated.PS
Create Planar PitchBuilds what the guide calls a planar pitch.PH
Bridge CurveJoins two curves with a connecting curve that keeps curvature continuous (G2).BC
Create Runoff SurfaceBuilds the surface that runs outward from the parting line of the part, used to split core from cavity.RS
Bounded Runoff SurfaceBuilds a runoff surface with the Bounded Runoff Surface command.BR
Radiate Runoff SurfaceWorks with radiated runoff surfaces: create one, change it or delete it.RR
Extend Runoff SurfaceEnlarges an existing runoff surface in a mold design.ET
Use Existing SurfaceHandles existing patching and runoff surfaces, which it can create, edit or delete.ES
Generate Core and CavityProduces the files that the core and cavity require.GC
Place Core and CavityPlaces an imported core and cavity, or deletes it.CC
Combine Cores and CavitiesWorks with combined cores and cavities: create one, change it or delete it.CM
Mold BooleanRuns interference checking together with the Boolean calculation.BL
Create InsertWorks together with Manual Sketch, which draws the insert sketch, and Place Insert, which puts a generated insert into the mold.CI
Manual SketchTakes you into a part's sketch environment to draw the sketch for an insert.MS
Place InsertPuts a previously generated insert into the mold assembly.PI
Create HeelAdds one or more heels to an insert.CH

Command Aliases: Mold Design (Mold Base, Runners & Analysis) 27

ActionWindows
Mold BaseOpens the tools for building a mold base.MB
User Mold BasePuts a user-defined mold base into the design.UM
Mold Base AuthorPrepares a user-defined mold base for insertion by assigning attributes to its components.AU
Sprue BushingAdds a sprue bushing, either a vendor part or a custom one.SB
Locating RingAdds the ring that centers the mold on the platen of the molding machine.LR
EjectorAdds an ejector pin for pushing the plastic part out.EJ
Place Core PinAdds a core pin to the mold.CP
SliderAdds a standard slider, the moving mold part that shapes undercuts on the side of a plastic part.SA
LifterAdds a lifter assembly, which lets the mold open and close smoothly.LA
Lock SetAdds a lock set, either a side lock or an interlock.SL
Gate LocationSets the points on the plastic part where gates will be placed.GP
GatePuts a gate into the design.GT
RunnerBuilds the channel that carries plastic from the sprue to the gates, following a runner sketch.RN
Auto Runner SketchGenerates the sketch that the Runner command follows, instead of drawing it by hand.AR
Secondary SprueManages secondary sprues in the mold design: add a new one, or edit, delete and resize an existing one.SP
Cold WellSets up cold wells, which sit on a runner or where the sprue ends.CW
Cooling ChannelAdds a channel for coolant to the mold; depending on the environment the same alias runs Create Heel instead.CH
Cooling ComponentSelects which components carry coolant along the cooling channels.CS
Cooling Channel CheckVerifies the cooling channels: safety, interference and how far apart the cooling system segments are.CC
Part Process SettingsFrom the chosen material and part geometry, works out the best injection time and mold and melt temperatures.MP
Mold Process SettingsDepending on the design environment, the same alias instead creates a patching surface.PS
Part Fill AnalysisShows how the polymer flows through the parts.PF
Mold Fill AnalysisPredicts how the thermoplastic polymer flows inside the mold during filling.MF
Job ManagerTracks the progress of analyses and can stop one if necessary.JM
Animate ResultsPlays the selected simulation results as an animation.AM
Set Plot PropertyChanges a property of the result plot.PR
2D DrawingProduces drawing documents, one or several.2D

Notes

Sketching without the ribbon

S starts a 2D sketch on a face or plane. Inside it, L draws lines and arcs, D places a dimension, X trims and O offsets a profile. Most other sketch tools use longer aliases: CE for a centre point circle, REC for a two point rectangle, FI for a fillet, MI to mirror. Aliases of two or more characters are switched off until Use Default Multi-Character Command Aliases is ticked on the Keyboard tab of the Customize dialog, so on a default installation they are inactive. Constraints have keys of their own: = applies Equal and I starts Vertical, while F8 shows every constraint in the sketch and F9 hides them again. When the model is in the way of the sketch plane, F7 slices the graphics away temporarily.

Modelling and viewing

E extrudes a profile, R revolves a sketch and H adds a hole. Chamfer, loft, mirror and sweep also have Ctrl + Shift chords, such as Ctrl + Shift + K for Chamfer and Ctrl + Shift + S for Sweep, and work features are on the punctuation keys: ] for a work plane, / for a work axis and . for a work point. Viewing is on the function keys and the middle button: F2 pans and F3 zooms for as long as the key is held down, F4 rotates, F6 returns to the isometric home view and F5 steps back to the previous view. Shift + Middle-click orbits the model as well, Home fits everything in the window and End zooms to the selection.

Assemblies

In an assembly, P places a component, N creates one in place and C adds a constraint — the same letter the Inventor help lists for a centre point circle inside a sketch, which is the clearest example of Inventor's context-dependent letters. Dragging a component with Alt + Drag applies a mate constraint directly. Ctrl + H replaces a component, and Shift + Tab promotes a part out of its subassembly into the parent assembly, with Tab as the matching Demote key. For moving and turning parts the Shortcut Key Guide gives V for Move Component and G for Rotate Component, while the Inventor help lists M and RO; the Keyboard tab of the Customize dialog shows which pair your installation uses.

Questions

Why do aliases like REC or CE do nothing in my Inventor?

Aliases of two or more characters are part of the default multi-character alias set, and Autodesk's help states that this set is not enabled by default. On the Tools tab, Options panel, click Customize, open the Keyboard tab and select Use Default Multi-Character Command Aliases. After that REC, CE and the other longer aliases start their commands.

What is the difference between a shortcut key and a command alias in Inventor?

A command alias is a letter or short character sequence, such as E or LO, that starts a modelling command, and aliases are not used while a dialog box is active. Shortcuts are key combinations such as Ctrl + Shift + K; Autodesk uses them mainly for transparent commands like zoom and pan and for file functions like printing, and in general they still work while a dialog box is open.

Why does the same letter start different commands?

An alias belongs to an environment. C adds a constraint in an assembly, T is Text in a drawing and Tweak Components in a presentation, and P places a component in an assembly but a Cable and Harness pin on a part. If you type an alias where its command cannot be used, the alias is simply inactive.

How do I pan, zoom and rotate the model from the keyboard?

F2 pans and F3 zooms, each only while the key is held down, and F4 rotates; Shift + Middle-click orbits too. F6 goes to the home view, F5 returns to the previous view, Home fits everything in the window and End zooms to the selected item.

Can I change, export or print Inventor's shortcuts?

Yes. In the Customize dialog box, Keyboard tab, click in the Keys column next to a command and type the new alias or shortcut. The same dialog imports and exports the assignments as an XML file, and its Copy to Clipboard button gives a list of every command with its alias or shortcut that you can paste into a spreadsheet. Reserved keys, among them Ctrl + C, Ctrl + V, Ctrl + X, the function keys, Esc and Delete, cannot be reassigned.

Why does this page show two aliases for Trim, Move Component and a few other commands?

Because Autodesk's two references differ. The Shortcut Key Guide lists X for Trim and V for Move Component, while the Inventor help lists TR and M. Both are shown, each with its source. To see which one your installation uses, pause the cursor over the command or open the Keyboard tab of the Customize dialog.

Sources and checks

Every row on this page was matched to a line in the documentation above on . A binding that could not be found there is not listed.

13 rows from the earlier version of this page were removed in that check: duplicates, and bindings the documentation does not list or lists differently.

Found a wrong or missing key? Tell us and it gets checked against the source. How we verify describes the process and its limits.