Revit keyboard shortcuts for Windows

Most Revit shortcuts are two characters typed in sequence, with no modifier key and no Enter: WA starts a wall, DR places a door. The table holds the default assignments, grouped by task from the Architecture, Structure and Systems tools to view control and snaps, and the reserved keys, which cannot be reassigned. A few codes belong to two tools; the status bar shows the first match as you type and the arrow keys step through the rest.

232 shortcuts in 13 sections. Checked row by row against Autodesk on . Edited by Jay.

Architecture 11

ActionWindows
WallCreates an architectural or structural wall.WA
DoorPlaces a door in a wall.DR
WindowPlaces a window in a wall, or a skylight in a roof.WN
ColumnAdds an architectural or structural column.CL
Place a ComponentPlaces an instance of a loadable family; the tool sits on the Build panel of the Architecture tab.CM
GridPlaces column grid lines from the Datum panel of the Architecture or Structure tab.GR
LevelPlaces a level in an elevation or section view.LL
RoomCreates a room bounded by model elements and separation lines.RM
Reference PlaneDraws a line that stands for a plane, used as a guide for aligning or constraining elements.RP
Structural FloorSketches the boundary of a floor that carries the Structural parameter and has a span direction.SB
Pick a Work PlaneSets the active work plane by picking an existing plane in the view.PK

Structure 20

ActionWindows
Structural BeamAdds a beam of the Structural Framing category from the Structure tab.BM
Structural BraceAdds a diagonal brace between beams and columns.BR
Beam SystemLays out a series of parallel beams; the same key starts the Automatic Beam System option.BS
Wall FoundationAdds a strip footing beneath each wall you pick and keeps it attached to that wall.FT
Reinforcement NumbersEdits rebar and fabric numbering sequences.RN
Apply CopingApplies coping to a steel beam or column where it meets other framing.CP
Remove CopingRemoves coping that was applied to a steel beam or column.RC
Precast SplitPrecast extension: divides the selected walls or slabs into precast assemblies.PL
Precast ReinforcementPrecast extension: adds reinforcement to the selected precast assemblies.RF
Precast ConfigurationPrecast extension: opens the configuration that drives segmentation and reinforcement.CFG
Justification PointsSets a justification point for relocating a framing element.JP
y OffsetOffsets a framing element in its y direction.JY
z OffsetOffsets a framing element in its z direction.JZ
Toggle Two-way ConstraintRebar editing: toggles the two-way constraint from the drawing area.LH
Toggle Rebar Cover ConstraintRebar editing: toggles the constraint to concrete cover.CF
Toggle Bar AlignmentRebar editing: toggles the alignment of the bars in a set.AF
Toggle Rebar Auto-closeRebar editing: toggles automatic loop closing for free form rebar.LC
Toggle Rebar Clear DistanceRebar editing: toggles the clear-distance constraint between bars.CD
Toggle Rebar VisibilityContext-menu command that switches visibility for the selected rebar.TV
Flip Rebar SetContext-menu command that reverses the direction of the rebar set you have selected.FL

Systems 32

Autodesk’s default list prints function keys as Fn9, Fn11 and Fn3. Its reserved-key table writes F1/Fn1 and F10/Fn10 side by side, so these are the ordinary F keys, not Fn chords.

ActionWindows
DuctDraws rigid ductwork from the HVAC panel of the Systems tab.DT
PipeDraws rigid piping; the tool sits on the Plumbing & Piping panel of the Systems tab.PI
ConduitDraws a rigid run from the Electrical panel of the Systems tab.CN
Cable TrayDraws a tray run for cables; the tool is next to Conduit on the Electrical panel.CT
Lighting FixtureMost lighting fixture families are hosted, so the tool needs a ceiling, wall or face to place them on.LF
Mechanical EquipmentPlaces boilers, furnaces, fans and similar.ME
SprinklerPlaces a fire-protection sprinkler head; the tool sits on the Plumbing & Piping panel of the Systems tab.SK
System BrowserShows the System Browser, which lists components by system or zone.F9
MEP Fabrication Parts PaletteShows or hides the MEP Fabrication Parts palette.PB
Duct FittingPlaces duct fittings such as elbows, tees, and end caps.DF
Duct AccessoryAdds duct accessories such as dampers.DA
Convert to Flex DuctTurns a section of rigid duct into flexible duct.CV
Flex DuctDraws flexible ductwork, where the Duct tool on the same HVAC panel draws rigid runs.FD
Air TerminalPlaces a register, grille, or diffuser.AT
Multi-Point RoutingRoutes a run of fabrication parts by clicking successive points.MR
Pipe FittingPlaces a fitting in a piping system.PF
Pipe AccessoryAdds a pipe accessory to a piping run.PA
Flex PipeDraws flexible piping, the counterpart of the rigid Pipe tool on the Plumbing & Piping panel.FP
Plumbing EquipmentPlaces a family of this category from the Plumbing & Piping panel of the Systems tab.PE
Plumbing FixturePlaces sinks, toilets, tubs and similar fixtures that connect to piping systems.PX
Arc WireDraws wiring as arcs; the tool is on the Electrical panel of the Systems tab.AW
Cable Tray FittingPlaces a fitting such as an elbow or tee on a cable tray run.TF
Conduit FittingPlaces a fitting such as an elbow on a conduit run.NF
Electrical EquipmentPlaces electrical equipment such as panels and switchgear.EE
System-Zone by SketchSketches the boundary of a system-zone on the Analyze tab.SZ
Panel SchedulesGenerates a panel schedule for the selected electrical panel.PS
Check Duct SystemsChecks that duct systems are assigned and properly connected.DC
Check Pipe SystemsChecks that piping systems are assigned and properly connected.PC
Check CircuitsVerifies that circuits are connected to panels and assigned to valid systems.EC
Edit PartOpens the editing dialog for the selected fabrication part.EP
Show Help TooltipShows the help tooltip while you place fabrication parts.HT
Renumber IndexesRenumbers the circuit indexes from the Circuits contextual tab.RI

Massing, Site & Shape Editing 5

ActionWindows
Topography Cut Void StabilityToggles the stability option for voids that cut a toposolid.BP
Toposolid Smooth ShadingToggles smooth shading on toposolid surfaces.TS
Divide SurfaceApplies a division grid to a surface in a conceptual design.//
Preview PointsShape editing: toggles the preview of shape-edit points.PV
Snap to Editor Points/LinesShape editing: toggles snapping to shape-edit points and lines.SG

Annotate 16

ActionWindows
Aligned DimensionMeasures between parallel references, or between points, that you pick one after another.DI
Detail LineDraws a line that shows only in the view where it is drawn, unlike a model line.DL
Spot ElevationDisplays the elevation of a picked point.EL
TextAdds a text note to the current view; the tool is also on the Quick Access Toolbar.TX
Tag by CategoryTags elements according to their category.TG
Room TagAdds a tag that reports room parameters such as name, number and area to a room that has none.RT
Find/ReplaceSearches text notes for a word and swaps it for another one.FR
BoldText editor: makes the selected text bold.Ctrl+B
ItalicText editor: italicizes the selected text.Ctrl+I
UnderlineText editor: underlines the selected text.Ctrl+U
SubscriptText editor: sets the selected text as subscript.Ctrl+=
SuperscriptText editor: sets the selected text as superscript.Ctrl+Shift+=
All CapsText editor: shows the selected text in capitals.Ctrl+Shift+A
Close Text EditorCloses the text editor and finishes the note.Ctrl+Q
Edit Witness LinesAdds or removes witness lines on the selected dimension.EW
Check SpellingCovers the text notes of the current view or sheet, or only the notes that are selected.F7

Modify 25

A few codes belong to two commands (RC, RG, PC, SZ). When a code matches several tools the status bar shows the first match and the arrow keys step through the others.

ActionWindows
AlignAligns one or more elements to a picked reference.AL
ArrayCreates a linear or radial array. Not Area — Autodesk assigns AR to Array.AR
CopyPlaces the copy right away in the same view, from a start point to an end point you click.COorCC
Create SimilarStarts a new element of the same type as the selection.CS
DeleteRemoves the selection from the model.DE
MoveShifts the selection by the distance and direction between two points that you click.MV
RotateRotates the selection around an axis.RO
ScaleResizes lines, walls, images and a few other element types, either graphically or by a numeric factor.RE
Mirror — Pick AxisMirrors using an existing line as the axis.MM
Mirror — Draw AxisReflects the selection across a temporary line that you sketch with two clicks.DM
OffsetMoves a line, wall, or beam perpendicular to its length.OF
Trim/Extend to CornerTrims or extends elements to form a corner.TR
Split ElementCuts a wall or line at a picked point.SL
Split FaceDivides a face into material regions.SF
PinLocks the selected element in place so that it cannot be moved until it is unpinned.PN
Match Type PropertiesConverts elements to match another element's type.MA
PaintApplies a material to a face you pick; the tool is on the Geometry panel of the Modify tab.PT
LineworkOverrides a line style in the active view only.LW
Model LinePlaces a model, boundary, or rebar line.LI
ModifyEnds the active tool and returns to selecting elements; the button is on every ribbon tab.MD
Repeat Last CommandRuns the most recent tool again; the same command sits on the right-click menu of the drawing area.RC
Select All InstancesSelects all instances of the type across the project.SA
Activate Controls and DimensionsToggles controls and temporary dimensions for a selection of several elements.AC
UnpinReleases a pinned element so it can be moved again.UP
Place Center of RotationRelocates the center of rotation while rotating elements.R3

Groups 12

ActionWindows
Create GroupGroups the selected model or detail elements.GP
Edit GroupOpens the selected group so that elements can be added to it or removed from it.EG
FinishLeaves group edit mode and keeps the changes made to the group.FG
UngroupDissolves the selected group instance into separate elements; the group type stays in the Project Browser.UG
Add to GroupAdds elements to the group being edited.AP
Remove from GroupTakes elements out of the group being edited.RG
Attach Detail GroupCreates a detail group attached to the model group.AD
Cancel Group EditLeaves group edit mode without keeping the changes.CG
Move to ProjectMoves the selected member out of the group and into the project.MP
Restore All ExcludedBrings back every member excluded from the selected group instance.RA
Restore Excluded MemberBrings back one excluded member of a group instance.RB
Exclude from GroupExcludes the selected member from a group instance.EX

View Control 26

ActionWindows
WireframeDraws all edges with no surfaces.WF
Hidden LineDraws edges except those behind surfaces.HL
Shaded with EdgesApplies the shaded-with-edges style.SD
Graphic Display OptionsOpens the dialog with the view's model display, shadow, lighting and background settings.GD
Visibility/GraphicsOpens the dialog that sets, for the active view, which categories show and how they are drawn.VGorVV
Thin LinesDraws every line at single width regardless of zoom.TL
Hide ElementHides the selected elements for the moment; Reset Temporary Hide/Isolate brings them back.HH
Hide CategoryHides every element of the selected categories for the moment, in the current view only.HC
Isolate ElementShows only the selected elements and hides the rest of the view for the moment.HI
Isolate CategoryShows only the categories of the selected elements; the rest of the view is hidden for the moment.IC
Reset Temporary Hide/IsolateRestores everything hidden or isolated temporarily.HR
Reveal Hidden ElementsSwitches the mode in which hidden elements are displayed so that they can be unhidden.RH
Reveal ConstraintsToggles constraint display in the view.CX
RenderOpens the Rendering dialog for the 3D view, from the Presentation panel or the View Control Bar.RR
Render in CloudSends the 3D view to the cloud rendering service.RD
Render GalleryOpens the online gallery of your cloud renderings.RG
Hide Elements in ViewHides the selected elements in the current view until you unhide them.EH
Hide Category in ViewHides the categories of the selected elements in the current view.VH
Override Graphics by ElementOpens graphic overrides for the selected elements in the current view.EOD
Selection BoxIsolates the selected elements in a 3D view with a section box.BX
Unhide ElementIn Reveal Hidden Elements mode, restores the selected hidden elements.EU
Unhide CategoryIn Reveal Hidden Elements mode, restores the selected hidden category.VU
View RangeOpens the View Range settings of the active plan view.VR
Halftone by CategoryToggles halftone for the category of the selection in the current view.VOH
Accelerated Graphics ModeToggles Accelerated Graphics for the active view.F3
Halftone by ElementToggles halftone for the selected elements in the current view.EOH

Manage & Collaborate 17

ActionWindows
Properties PaletteShows or hides the palette that lists the instance parameters of the selection or, with nothing selected, of the view.PPorCtrl+1orVP
Keyboard ShortcutsOpens the dialog where key sequences are assigned to tools; it is on the Windows panel of the View tab.KS
Project UnitsOpens the dialog that sets how lengths, areas, angles and other values are displayed.UN
Sun SettingsOpens the dialog for solar studies, where location, date and time set the position of the sun.SU
Electrical SettingsOpens the MEP settings for wiring, voltages, distribution systems, cable tray and conduit.ES
Mechanical SettingsOpens the MEP settings for ducts and pipes, such as sizes, angles and conversion.MS
Tile ViewsArranges all open views side by side in the drawing area instead of as tabs.WT
Editing RequestsLists the pending requests to borrow elements in a workshared model.ER
Reload LatestLoads the changes others saved to the central model without publishing your own.RLorRW
Tab ViewsRegroups the open views as tabs in the drawing area.TW
Canvas ThemeSwitches the drawing-area canvas between its light and dark themes.CA
Parameters ServiceOpens the Parameters Service for finding and adding parameters.PM
Global ParametersOpens the dialog for project-wide parameters that can drive dimensions and element properties.GL
Fabrication SettingsOpens the MEP settings where the fabrication configuration and its services are chosen.FS
Building/Space Type SettingsOpens the MEP defaults per building and space type, such as occupancy and lighting loads, used in energy analysis.BT
Background ProcessesOpens the list of background processes from the status bar.F11
Find in Project BrowserLocates the selected item in the Project Browser.FF

File & Edit 12

ActionWindows
New ProjectBrings up the New Project dialog, where a template file is chosen for the project.Ctrl+N
OpenReserved key that brings up the dialog for choosing a Revit file to load.Ctrl+O
SaveReserved key that writes the changes of the active file to disk.Ctrl+S
PrintSends the current view or sheet to the Print dialog.Ctrl+P
Close ProjectReserved key; the current project closes while Revit itself stays open.Ctrl+W
Close Open ProjectSecond reserved key that closes the project now open.Ctrl+F4
Exit RevitCloses Revit itself rather than a single project; the key is reserved and cannot be reassigned.Alt+F4
Copy to ClipboardKeeps the copied elements for pasting into another view, level or project, unlike the Copy tool.Ctrl+CorCtrl+Insert
Cut to ClipboardRemoves the selection and keeps it on the clipboard.Ctrl+XorShift+Delete
Paste from ClipboardInserts whatever was last copied or cut.Ctrl+V
UndoReverses the last action; repeat to step further back.Ctrl+ZorAlt+Backspace
RedoReapplies the action you just undid; repeat to step forward.Ctrl+YorCtrl+Shift+Z

Selection & Editing Keys 9

ActionWindows
Add to SelectionAdds each element you click to the current selection.Ctrl+Click
Remove from SelectionDrops the clicked element from the selection and keeps the rest.Shift+Click
Reselect PreviousRestores the selection you had before it was cleared.Ctrl+Left
Cycle Nearby ElementsSteps through overlapping or connected elements under the cursor before you click.Tab
Cycle Nearby Elements BackwardsSteps through the same candidates in reverse order.Shift+Tab
Nudge SelectionNudges the selected elements up, down, left, or right.Arrow keys
Flip ElementHas the same effect as clicking the flip arrows of a selected door, window or wall.Space
CancelCancels a placement or clears the selection; press it twice to leave a tool or editor.Esc
Execute ActionReserved key that carries out the action or value being entered.Enter

Interface & Schedules 13

Schedule zoom-in is the same physical key in both Autodesk lists: the default list records it as Ctrl+=, the reserved-key table as Ctrl+(+).

ActionWindows
Activate First Contextual TabSwitches the ribbon to the first contextual tab.Ctrl+`
Schedule Zoom InEnlarges the text of a schedule view.Ctrl+=
Show KeytipsDisplays keytips for the ribbon, the application menu, and the Quick Access toolbar.Alt
Show Keytips (Function Key)Function-key alternative that turns keytips on.F10
Revit HelpOpens the help; with a ribbon tooltip showing, it goes straight to the topic for that tool.F1
RefreshRedraws the drawing area, for example to clear display leftovers after an edit.F5
Project Browser SearchJumps to the search field of the Project Browser.Ctrl+F
Toggle HomeShows Revit Home, with its recent files, or returns to the open model and its ribbon.Ctrl+D
Next Matching ShortcutWhile you type a shortcut, shows the next tool that matches on the status bar.DownorRight
Previous Matching ShortcutSteps back through the tools that match the keys typed so far.UporLeft
Run Shortcut on Status BarAfter the first keys of a shortcut, starts the matching tool that the status bar is showing.Space
Schedule Zoom ResetReturns a schedule view to 100% zoom.Ctrl+0
Schedule Zoom OutShrinks the text of a schedule view.Ctrl+-

Notes

Revit shortcuts are two-letter mnemonics, and they queue

Revit’s tool shortcuts are almost never modifier chords; the chords in the tables above are reserved Windows keys and text-editor formatting. Nearly every command is two characters typed in sequence — WA for wall, DR for door, WN for window — and you do not press Enter afterwards. That has one practical consequence worth knowing: because Revit is watching for a second letter, a mistyped first letter can silently swallow the next one. If a command does not fire, press Esc and retype rather than adding more letters. The upside is that the mnemonics are guessable. Move is MV, Rotate is RO, Copy is CO / CC, Align is AL, Trim is TR. Once the pattern clicks you will correctly guess shortcuts you have never used.

Two shortcuts that are widely mislabelled

AR is Array, not Area. It creates a linear or radial array of the selected elements, and third-party cheat sheets that list it as an area tool are simply wrong — a mistake worth flagging because pressing it with a wall selected produces something very visible and very unintended. Mirror is the other one. Some lists show MI; Autodesk’s default list has no such code and splits mirroring into MM, which mirrors across a line you pick, and DM, which mirrors across a line you draw. Both appear in the table above. The pick-axis version is what you want when a grid line or reference plane already exists; the draw-axis version is for everything else.

The view-control pairs worth memorising

Revit’s temporary hide and isolate tools are the fastest way to work inside a busy model, and they come as a set: HH hides the selected element, HC hides its whole category, HI isolates the element, IC isolates the category, and HR resets all of it. Because these are temporary, they vanish when you close the view — which is exactly why they are safe to use aggressively. Pair them with VG / VV for permanent per-view overrides and TL for thin lines when you need to read a drawing at low zoom. Navigation follows the same shape: ZE / ZF / ZX fits the view, ZR / ZZ zooms a dragged region, and ZP / ZC steps back to where you just were.

Questions

Do I press Enter after typing a Revit shortcut?

No. Revit fires the command as soon as it recognises the two-letter sequence. If nothing happens, a stray keystroke has probably left a partial sequence in the buffer — press Esc and type it again cleanly.

Is AR the Area tool?

No, and this is the single most commonly repeated error in Revit shortcut lists. AR is Array. Autodesk’s own default list files it under Modify, alongside AL for Align.

What happened to MI for Mirror?

Autodesk’s default list for Revit has no MI. Mirroring is two commands: MM mirrors across an axis you select, DM mirrors across an axis you draw. Lists showing a single MI row do not match the shipped defaults.

Why do some codes appear twice on this page?

Because Autodesk assigns a few codes to more than one command: RC is both Repeat Last Command and Remove Coping, PC both Check Pipe Systems and Snap to Point Clouds. When a code matches several tools, the status bar shows the first match and the arrow keys step through the rest. Where Autodesk lists genuine aliases for one command — ZE / ZF / ZX all fit the view — we keep one row and show the aliases together rather than padding the table.

How do I see or change the shortcut for a specific tool?

Hover the tool on the ribbon; the assigned sequence appears in the tooltip, and an empty tooltip means nothing is assigned. KS opens the Keyboard Shortcuts dialog where you can assign your own.

Which shortcuts should a beginner learn first?

The modelling six — WA, DR, WN, CM, GR, LL — then the modify four: MV, CO / CC, AL, TR. Those ten cover the majority of keystrokes in a normal documentation day.

Sources and checks

4 more source pages

Every row on this page was matched to a line in the documentation above on . A binding that could not be found there is not listed.

2 rows from the earlier version of this page were removed in that check: duplicates, and bindings the documentation does not list or lists differently.

Found a wrong or missing key? Tell us and it gets checked against the source. How we verify describes the process and its limits.