Default Notepad++ key bindings for Windows, read from the key tables in the source code of release 8.9.8.1 and checked against the official user manual: menu commands, Scintilla editor keys and a few documented mouse actions. Commands without a default key, plugin shortcuts and recorded macros are left out. Every binding can be reassigned in Settings › Shortcut Mapper. Alt and Shift with the arrow keys start a column selection, and Ctrl + D duplicates the line or selection.
NewCreates an empty, unsaved document in a new tab.
Ctrl+N
OpenShows the file-selection dialog for loading an existing file into a tab.
Ctrl+O
Reload from DiskRe-reads the file from the filesystem and drops unsaved edits, bookmarks and change history.
Ctrl+R
SaveWrites the current document to the file name it already has.
Ctrl+S
Save AsAsks for a new file name and keeps working with that new file afterwards.
Ctrl+Alt+S
Save AllSaves every document that is open in either of the two views.
Ctrl+Shift+S
CloseCloses the active document and asks about saving when it has been modified.
Ctrl+W
Close AllCloses every open document, prompting for each one with unsaved changes.
Ctrl+Shift+W
PrintOpens the Print dialog for the active file.
Ctrl+P
Restore Recent Closed FileReopens the file closed most recently, the top entry of the Recent Files list.
Ctrl+Shift+T
ExitQuits Notepad++; with Remember current session enabled, the open files come back at the next launch.
Alt+F4
Document tabs 15
The numbered tab shortcuts use the digits of the numeric keypad, not the digit row. The manual points keyboards without a keypad to the First Tab and Last Tab commands, which have no default key.
The User Interface page of the manual names the Page Up and Page Down tab keys the other way round. The table here follows the default bindings in the 8.9.8.1 source: Page Down is Next Tab and Page Up is Previous Tab.
Action
Windows
1st TabActivates the first tab on the tab bar of the active view.
Ctrl+Numpad 1
2nd TabActivates the second tab on the tab bar of the active view.
Ctrl+Numpad 2
3rd TabActivates the third tab on the tab bar of the active view.
Ctrl+Numpad 3
4th TabActivates the fourth tab on the tab bar of the active view.
Ctrl+Numpad 4
5th TabActivates the fifth tab on the tab bar of the active view.
Ctrl+Numpad 5
6th TabActivates the sixth tab on the tab bar of the active view.
Ctrl+Numpad 6
7th TabActivates the seventh tab on the tab bar of the active view.
Ctrl+Numpad 7
8th TabActivates the eighth tab on the tab bar of the active view.
Ctrl+Numpad 8
9th TabActivates the ninth tab on the tab bar of the active view.
Ctrl+Numpad 9
Next TabActivates the following tab on the tab bar and wraps around after the last one.
Ctrl+Page Down
Previous TabActivates the preceding tab on the tab bar and wraps around before the first one.
Ctrl+Page Up
Move Tab ForwardShifts the current file one slot later in the tab order.
Ctrl+Shift+Page Down
Move Tab BackwardShifts the current file one slot earlier in the tab order.
Ctrl+Shift+Page Up
Switch to next documentBy default a Document Switcher popup lists the files in most-recently-used order while Ctrl stays held.
Ctrl+Tab
Switch to previous documentSteps the opposite way through the Document Switcher list while Ctrl stays held.
Ctrl+Shift+Tab
View and window 8
Action
Windows
Toggle Full Screen ModeHides the title bar, menu bar and toolbar and fills the screen; the same key returns to the normal window.
F11
Post-ItHides the title bar, menus, toolbar and tab bar but keeps the window at its current size.
F12
Focus on Another ViewMoves the input focus to the other view when both views are visible.
F8
Zoom InEnlarges the text of the current view only; the key is plus on the numeric keypad.
Ctrl+Num +
Zoom OutShrinks the text of the current view only; the key is minus on the numeric keypad.
Ctrl+Num -
Restore Default ZoomReturns the text size of the current view to the default setting.
Ctrl+Num /
Text Direction RTLLays the current file out right to left, as needed for Hebrew or Arabic text.
Ctrl+Alt+R
Text Direction LTRSwitches a file that was set to right-to-left back to left-to-right layout.
Ctrl+Alt+L
Clipboard, undo and redo 10
Cut and Copy are context aware: with a selection they act on it, and with no selection they act on the whole current line.
Action
Windows
CutWith nothing selected it cuts the whole current line instead.
Ctrl+X
CutWith nothing selected it deletes the current line and leaves the clipboard alone.
Shift+Delete
CopyWith nothing selected it copies the whole current line instead.
Ctrl+C
CopyA second default binding for the Copy command of the Edit menu.
Ctrl+Insert
PasteInserts the clipboard contents at the caret, replacing any selected text.
Ctrl+V
PasteA second default binding for the Paste command of the Edit menu.
Shift+Insert
UndoReverses the most recent edit in the active document.
Ctrl+Z
UndoA second default binding, listed under SCI_UNDO in the Shortcut Mapper.
Alt+Backspace
RedoReapplies the edit that Undo reversed last.
Ctrl+Y
RedoA second default binding, listed under SCI_REDO in the Shortcut Mapper.
Ctrl+Shift+Z
Editing lines 16
Action
Windows
Insert new lineStarts a new line at the caret and applies the indentation rules.
Enter
Insert new lineDoes the same as plain Enter in the editor; both keys are bound to SCI_NEWLINE.
Shift+Enter
Indent or insert tabWith a selection it indents the selected text by one tab stop instead of inserting a tab.
Tab
Unindent (back tab)At the start of a line's text it removes one indent level; elsewhere the caret jumps back one tab stop.
Shift+Tab
Toggle insert/overtype modeListed as SCI_EDITTOGGLEOVERTYPE on the Scintilla commands tab of the Shortcut Mapper.
Insert
Duplicate selection or current lineSelection-aware; the menu command Duplicate Current Line ignores the selection and has no default key.
Ctrl+D
Cut current lineRemoves the whole line with its line ending and puts it on the clipboard.
Ctrl+L
Delete current lineRemoves the whole line with its line ending and leaves the clipboard unchanged.
Ctrl+Shift+L
Copy current linePuts the whole line, line ending included, on the clipboard without needing a selection.
Ctrl+Shift+X
Swap line with the one aboveHas no effect on the first line of a file.
Ctrl+T
Move Up Current LineSwaps the caret line with the one above; a selection spanning several lines moves as a group.
Ctrl+Shift+Up
Move Down Current LineSwaps the caret line with the one below; a selection spanning several lines moves as a group.
Ctrl+Shift+Down
Insert Blank Line Above Current
Ctrl+Alt+Enter
Insert Blank Line Below Current
Ctrl+Alt+Shift+Enter
Split LinesBreaks long lines at the right-most vertical edge, or at the editor window width when no edge is set.
Ctrl+I
Join LinesMerges the selected lines into one, putting a single space where each line ending was.
Ctrl+J
Case conversion and comments 10
Action
Windows
UPPERCASEConverts the selected text to all capital letters.
Ctrl+Shift+U
lowercaseConverts the selected text to all small letters.
Ctrl+U
Proper CaseCapitalizes the first letter of every word and lowercases all the others.
Alt+U
Proper Case (blend)Capitalizes the first letter of every word and leaves the other letters as typed.
Alt+Shift+U
Sentence caseCapitalizes the first letter of each sentence and lowercases all the others.
Ctrl+Alt+U
Sentence case (blend)Capitalizes the first letter of each sentence and leaves the other letters as typed.
Ctrl+Alt+Shift+U
Toggle Single Line CommentAdds or removes the line-comment prefix defined for the language of the file.
Ctrl+Q
Single Line CommentPuts the line-comment prefix of the file's language in front of each selected line.
Ctrl+K
Single Line UncommentTakes the line-comment prefix of the file's language off the selected lines.
Ctrl+Shift+K
Block CommentWraps the selected text in the block-comment start and end strings of the file's language.
Ctrl+Shift+Q
Auto-completion 6
Action
Windows
Function CompletionForces a completion from the function list of the language, even when automatic completion is switched off.
Ctrl+Space
Word CompletionCompletes from words in the file; a single match is inserted at once without showing a list.
Ctrl+Enter
Path CompletionLists matching file-system paths after you type a drive such as C: and is never triggered automatically.
Ctrl+Alt+Space
Function Parameters HintShows the call tip for a function while the caret is between its parentheses.
Ctrl+Shift+Space
Function Parameters Previous HintGoes back one definition when the call tip offers several for the same function.
Alt+Up
Function Parameters Next HintGoes forward one definition when the call tip offers several for the same function.
Alt+Down
Moving the caret 22
Action
Windows
Move caret left one characterA plain arrow key also ends column mode and returns to a normal stream selection.
Left
Move caret right one characterWith several carets placed by Multi-Editing, the arrow keys move all of them together.
Right
Move caret up one line
Up
Move caret down one line
Down
Move to start of previous wordInside a word it first goes to the start of that word; a run of punctuation counts as a word.
Ctrl+Left
Move to start of next wordStops at each switch between alphanumeric characters and punctuation as well as after spaces.
Ctrl+Right
Move to previous word partLike the word jump, but it also stops inside CamelCase and underscore_separated names.
Ctrl+/
Move to next word partSteps forward one segment at a time through names written in CamelCase or with underscores.
Ctrl+\
Move to first non-blank characterPressed again when already at the indent, it goes on to the very start of the line.
Home
Move to end of wrapped lineWith line wrap on it stops at the end of the wrapped row first, then at the real line end.
End
Move to start of displayed lineWith line wrap on it targets the wrapped row's start; otherwise the real line start.
Alt+Home
Move to end of displayed lineWith line wrap on it targets the wrapped row's end; otherwise the real line end.
Alt+End
Move to previous paragraphInside a paragraph it goes to the first line of that paragraph before moving further up.
Ctrl+[
Move to next paragraphA paragraph here is a group of lines with no blank line between them.
Ctrl+]
Move up one pageMoves the caret with the view and stops at the top of the file when less than a page is left.
Page Up
Move down one pageMoves the caret with the view and stops at the bottom of the file when less than a page is left.
Page Down
Move to start of document
Ctrl+Home
Move to end of documentHandy between the two steps of Begin/End Select when a selection must reach the end of a long file.
Ctrl+End
Scroll view up one lineReveals one more line above the visible text and one fewer below it.
Ctrl+Up
Scroll view down one lineReveals one more line below the visible text and one fewer above it.
Ctrl+Down
Go toOpens a dialog that jumps to a line number or to a byte offset in the document.
Ctrl+G
Go to Matching BraceWith the caret next to a parenthesis, bracket or brace, jumps to its partner.
Ctrl+B
Selecting text 20
Action
Windows
Select AllCovers the whole text of the active document.
Ctrl+A
Extend selection left one characterGrows or shrinks a normal stream selection by a single character on its left side.
Shift+Left
Extend selection right one characterGrows or shrinks a normal stream selection by a single character on its right side.
Shift+Right
Extend selection up one lineBuilds a normal stream selection; adding Alt makes it a column block instead.
Shift+Up
Extend selection down one lineBuilds a normal stream selection; with Alt held as well it becomes a column block.
Shift+Down
Extend selection to previous wordSelects back to the start of the current word, or of the word before it when already there.
Ctrl+Shift+Left
Select to end of next wordSelects up to the end of the current word first, then to the end of each following word.
Ctrl+Shift+Right
Extend selection to previous word partSelects backward one CamelCase or underscore segment at a time.
Ctrl+Shift+/
Extend selection to next word partSelects forward one CamelCase or underscore segment at a time.
Ctrl+Shift+\
Select to first non-blank characterSelects back to the indent; pressed again it reaches the very start of the line.
Shift+Home
Extend selection to end of wrapped lineWith line wrap on it selects to the end of the wrapped row first, then to the real line end.
Shift+End
Extend selection to previous paragraphSelects from the caret back to the first line of the current or preceding paragraph.
Ctrl+Shift+[
Extend selection to next paragraphSelects from the caret to the first line of the paragraph that follows.
Ctrl+Shift+]
Extend selection up one pageSelects one screenful upward, or up to the top of the file when less than a page is left.
Shift+Page Up
Extend selection down one pageSelects one screenful downward, or down to the last line when less than a page is left.
Shift+Page Down
Extend selection to start of documentSelects everything between the caret and the first character of the file.
Ctrl+Shift+Home
Extend selection to end of documentSelects everything between the caret and the last character of the file.
Ctrl+Shift+End
Begin/End SelectRun it once to mark the starting point, move the caret anywhere, then run it again to select everything between.
Ctrl+Shift+B
Select All In-between {} [] or ()With the caret next to a brace, bracket or parenthesis, selects the pair and everything inside it.
Ctrl+Alt+B
Cancel popup or extra selectionsCloses an auto-completion list or call tip, keeps only the main selection and leaves column mode.
Esc
Column mode 10
Column mode ends as soon as the caret moves without Alt and Shift held, for example with a plain arrow key. Esc leaves it as well.
Action
Windows
Extend column selection up one lineStarts or grows a rectangular block upward from the caret.
Alt+Shift+Up
Extend column selection down one lineStarts or grows a rectangular block downward; this is the keyboard way into column mode.
Alt+Shift+Down
Extend column selection leftMoves the open edge of the rectangular block one character to the left.
Alt+Shift+Left
Extend column selection rightMoves the open edge of the rectangular block one character to the right.
Alt+Shift+Right
Extend column selection to line startStretches the rectangular block to the indent of the caret line, then to column one when already there.
Alt+Shift+Home
Extend column selection to line endStretches the rectangular block as far as the last character of the caret line.
Alt+Shift+End
Extend column selection up one pageStretches the rectangular block one screenful upward.
Alt+Shift+Page Up
Extend column selection down one pageStretches the rectangular block one screenful downward.
Alt+Shift+Page Down
Begin/End Select in Column ModeTwo-step selection like Begin/End Select, except that the result is a rectangular block.
Alt+Shift+B
Column EditorOpens a dialog that inserts text or an increasing number on every row of a column selection.
Alt+C
Deleting text 7
Action
Windows
DeleteRuns the Delete command of the Edit menu, listed as SCI_CLEAR in the Shortcut Mapper.
Delete
Delete character to the leftAt the start of a line it joins that line to the one before.
Backspace
Delete character to the leftSame action as plain Backspace; both keys are bound to SCI_DELETEBACK.
Shift+Backspace
Delete word to the leftAfter a space it removes everything back to where the preceding word starts.
Ctrl+Backspace
Delete word to the rightAlso removes the spaces or tabs that follow the word.
Ctrl+Delete
Delete to start of lineRemoves everything between the line start and the caret; the text after the caret stays.
Ctrl+Shift+Backspace
Delete to end of lineRemoves everything between the caret and the line end; the text before the caret stays.
Ctrl+Shift+Delete
Find and replace 15
Action
Windows
FindOpens the Find tab of the search dialog; pressing it again there re-centers the dialog.
Ctrl+F
ReplaceOpens the Replace tab, where matched text can be changed once it is found.
Ctrl+H
Find in FilesOpens the tab that searches every file of a chosen directory.
Ctrl+Shift+F
MarkOpens the Mark tab of the search dialog, which highlights the matches in the current document.
Ctrl+M
Find NextRepeats the current search target downward without opening a dialog; it also works from the Incremental Search bar.
F3
Find PreviousRepeats the current search target upward without opening a dialog.
Shift+F3
Select and Find NextSearches down for the word at the caret or the selected text and stores it for later Find Next.
Ctrl+F3
Select and Find PreviousSearches up for the word at the caret or the selected text and stores it as the search target.
Ctrl+Shift+F3
Find (Volatile) NextSearches down for the word at the caret or the selected text without storing it in the find history.
Ctrl+Alt+F3
Find (Volatile) PreviousSearches up for the word at the caret or the selected text and leaves the remembered search untouched.
Ctrl+Alt+Shift+F3
Incremental SearchOpens a small search bar that looks for matches while you type, as web browsers do.
Ctrl+Alt+I
Find in opposite directionOnly inside the Find dialog; plain Enter searches the way the Backward direction box is set.
Shift+Enter
Search Results WindowOpens the panel with the hits of earlier searches or gives it the input focus.
F7
Next Search ResultJumps in the editor to the following hit listed in the Search results window.
F4
Previous Search ResultJumps in the editor to the preceding hit listed in the Search results window.
Shift+F4
Bookmarks and marked text 15
Action
Windows
Toggle BookmarkSets or clears the bookmark indicator on the active line.
Ctrl+F2
Next BookmarkMoves the caret to the following bookmarked line of the active document.
F2
Previous BookmarkMoves the caret to the preceding bookmarked line of the active document.
Shift+F2
Jump down to 1st styleGoes to the next text highlighted with mark style 1 of the Style All Occurrences of Token menu.
Ctrl+1
Jump down to 2nd styleGoes to the next text highlighted with mark style 2 of the Style All Occurrences of Token menu.
Ctrl+2
Jump down to 3rd styleGoes to the next text highlighted with mark style 3 of the Style All Occurrences of Token menu.
Ctrl+3
Jump down to 4th styleGoes to the next text highlighted with mark style 4 of the Style All Occurrences of Token menu.
Ctrl+4
Jump down to 5th styleGoes to the next text highlighted with mark style 5 of the Style All Occurrences of Token menu.
Ctrl+5
Jump down to Find Mark styleGoes to the next text highlighted by the Mark tab of the search dialog.
Ctrl+0
Jump up to 1st styleGoes to the previous text highlighted with mark style 1 of the Style All Occurrences of Token menu.
Ctrl+Shift+1
Jump up to 2nd styleGoes to the previous text highlighted with mark style 2 of the Style All Occurrences of Token menu.
Ctrl+Shift+2
Jump up to 3rd styleGoes to the previous text highlighted with mark style 3 of the Style All Occurrences of Token menu.
Ctrl+Shift+3
Jump up to 4th styleGoes to the previous text highlighted with mark style 4 of the Style All Occurrences of Token menu.
Ctrl+Shift+4
Jump up to 5th styleGoes to the previous text highlighted with mark style 5 of the Style All Occurrences of Token menu.
Ctrl+Shift+5
Jump up to Find Mark styleGoes to the previous text highlighted by the Mark tab of the search dialog.
Ctrl+Shift+0
Folding and hiding lines 21
Action
Windows
Fold AllCollapses every fold block of the current file.
Alt+0
Unfold AllReveals every collapsed fold block of the current file.
Alt+Shift+0
Fold Current LevelCollapses the block around the caret line; a preference can make this key toggle the fold instead.
Ctrl+Alt+F
Unfold Current LevelReveals the collapsed block around the caret line again.
Ctrl+Alt+Shift+F
Fold Level 1Collapses every block at nesting level 1 of the active file; level 1 is the outermost block.
Alt+1
Fold Level 2Collapses every block at nesting level 2 of the active file.
Alt+2
Fold Level 3Collapses every block at nesting level 3 of the active file.
Alt+3
Fold Level 4Collapses every block at nesting level 4 of the active file.
Alt+4
Fold Level 5Collapses every block at nesting level 5 of the active file.
Alt+5
Fold Level 6Collapses every block at nesting level 6 of the active file.
Alt+6
Fold Level 7Collapses every block at nesting level 7 of the active file.
Alt+7
Fold Level 8Collapses every block at nesting level 8 of the active file.
Alt+8
Unfold Level 1Reveals every collapsed block at nesting level 1 of the active file.
Alt+Shift+1
Unfold Level 2Reveals every collapsed block at nesting level 2 of the active file.
Alt+Shift+2
Unfold Level 3Reveals every collapsed block at nesting level 3 of the active file.
Alt+Shift+3
Unfold Level 4Reveals every collapsed block at nesting level 4 of the active file.
Alt+Shift+4
Unfold Level 5Reveals every collapsed block at nesting level 5 of the active file.
Alt+Shift+5
Unfold Level 6Reveals every collapsed block at nesting level 6 of the active file.
Alt+Shift+6
Unfold Level 7Reveals every collapsed block at nesting level 7 of the active file.
Alt+Shift+7
Unfold Level 8Reveals every collapsed block at nesting level 8 of the active file.
Alt+Shift+8
Hide LinesHides the active or selected lines until you unhide them at the markers placed in the margin.
Alt+H
Macros, run and help 4
Action
Windows
Toggle macro recordingStarts or stops recording; the command exists only in the Shortcut Mapper, not in the Macro menu.
Ctrl+Shift+R
PlaybackRuns the macro held in the buffer one time at the caret position.
Ctrl+Shift+P
RunOpens the Run dialog of the Run menu for starting an external program or command.
F5
About Notepad++Opens the About dialog, which is also reachable from the ? menu.
F1
Mouse actions 6
Action
Windows
Select a column blockHold Alt while dragging with the left button; reshape the block afterwards with Alt + Shift and the arrow keys.
Alt+Drag
Add a caretMulti-Editing: each click sets one more caret, and clicking an extra caret again removes it.
Ctrl+Click
Add another selectionAdds a further stream selection once one exists; it does not combine with a column block.
Ctrl+Drag
Zoom with the mouse wheelWheel up enlarges and wheel down shrinks the text of the current view.
Ctrl+Scroll
Switch tabs with the wheelWith the pointer over the tab bar, wheel up goes to the tab before and wheel down to the one after.
Ctrl+Scroll
Jump to first or last tabWith the pointer over the tab bar, wheel up selects the first tab and wheel down the last.
Ctrl+Shift+Scroll
No row on this page matches that filter.
Notes
Line editing
Ctrl + D duplicates the current line, Ctrl + L deletes it (cutting it to the clipboard), and Ctrl + T swaps the current line with the one above. Ctrl + Shift + Up/Down moves a line or a selected block, and Ctrl + Q toggles a line comment using the syntax of the current language. Ctrl + G goes to a line number, which for log files is faster than scrolling. Undo is unlimited within the session.
Column mode
Alt + Shift + Arrow selects a rectangle of text across lines — column mode — and typing then edits every line at once, which is how you add a prefix to a hundred lines or strip a fixed-width column from a log. Alt plus a mouse drag does the same. Edit › Column Editor fills the selection with an incrementing number, the trick for renumbering a list.
Find, files and folding
Ctrl + H opens Find and Replace with regular-expression support, and Ctrl + Shift + F searches across files in a folder with results in a panel — a lightweight grep for Windows. Ctrl + Tab switches between open tabs in most-recently-used order, Ctrl + W closes one and Ctrl + Shift + S saves all. Alt + 0 collapses every fold in the file and Alt + Shift + 0 expands them, which makes a long XML or JSON file navigable.
Questions
Which Notepad++ keys are worth learning first?
For everyday editing: Ctrl + D duplicates the line or the selection, Ctrl + Shift + Up and Ctrl + Shift + Down move it, Ctrl + Q toggles a line comment, Ctrl + F3 finds the next occurrence of the word at the caret, and Ctrl + Shift + F searches a whole folder. Hold Alt and Shift with the arrow keys to select a column.
How many default key bindings does Notepad++ define?
Notepad++ 8.9.8.1 defines 189 default key bindings in its source code: 119 for menu commands and 70 for Scintilla editor commands. Many more commands have no default key, and every one of them can be given a key in Settings › Shortcut Mapper.